Optical Brighteners

Industrial Optical Brighteners

Direct-Manufacturer Grade Masterbatch & Polymer Additives

 

Industrial Optical Brighteners absorb invisible ultraviolet radiation (340–380 nm) and re-emit energy in the blue-violet spectrum (420–470 nm). This optical mechanism neutralizes yellow undertones, elevating the CIE whiteness index of polymer resins, fibers, paper, and surfactant formulations without altering baseline mechanical properties.


Primary Substrate Compatibility: Thermoplastics (PE, PP, PS, ABS, PET, PC, Nylon), synthetic and blended textile fibers, paper pulps, and liquid/powder detergent matrices.


Core Procurement Purpose: Raw material input for masterbatch compounding, virgin resin correction, post-consumer recycled (PCR) polymer stabilization, and industrial cleaning formulations.


Manufacturing Baseline: Produced via controlled organic synthesis with vacuum filtration and micronization milling, achieving consistent active content and tight particle size distribution (D90 < 10 µm for powder grades) to prevent agglomeration during high-speed compounding. 

 
  • Optical Brightener OB-1 for PSF
    Product name: Tonexwhite OB-1
    Color Index No: C.I.393
    Synonyms: FBA 393; OBA 393, Fluorescent Brightener OB-1; Optical Brightener Agent OB-1
    read more
  • Optical Brightener OB for Coating
    Product name: Tonex white OB
    Color Index No: C.I.184
    Synonyms: FBA 184; OBA 184, Fluorescent Brightener OB; Optical Brightener Agent OB
    read more
  • Optical Brightener FP-127 for PVC
    Product name: Tonex white FP-127
    Color Index No: C.I.378
    Synonyms : FBA 378; OBA 378, Fluorescent Brightener FP-127; Optical Brightener Agent FP-127, Fluorescent Brightener CBS-127;...
    read more
  • Optical Brightener KCB for EVA
    Product name: Tonex white KCB
    Color Index No: C.I.367
    Synonyms : FBA 367; OBA 367, Fluorescent Brightener KCB; Optical Brightener Agent KCB,
    read more
  • Optical Brightener KSN
    Product name: Tonex white KSN
    Color Index No: C.I.368
    Synonyms : FBA 368; OBA 368, Fluorescent Brightener KSN; Optical Brightener Agent KSN
    read more
  • Optical Brightener KSB
    Product name: Tonex white KSB
    Color Index No: C.I.369
    Synonyms : FBA 369; OBA 369, Fluorescent Brightener KSB; Optical Brightener Agent KSB
    read more
  • Optical Brightener MDAC
    Product name: Tonex white SWN
    Color Index No: C.I.140
    Synonyms: FBA 140; OBA 140, Fluorescent Brightener SWN;
    Optical Brightener Agent MDAC,
    Optical...
    read more
  • Optical Brightener ER-I
    Product name: Tonex white ER
    Color Index No: C.I.199
    Synonyms : FBA 199; OBA 199, Fluorescent Brightener 199; Optical Brightener Agent 199
    read more
  • Optical Brightener ER-II
    Product name: Tonex white ER-II
    Color Index No: C.I.199:1
    Synonyms : FBA 199:1; OBA 199:1, Fluorescent Brightener 199:1; Optical Brightener Agent 199:1,ER-II; ER-2
    read more
  • Optical Brightener ER-III
    Product name: Tonex white ER-III
    Color Index No: C.I.199:2
    Synonyms : FBA 199:2; OBA 199:2, Fluorescent Brightener 199:2; Optical Brightener Agent 199:2,ER-III,ER-3
    read more
  • Optical Brightener PF
    Product name: Tonex white PF
    Color Index No: C.I.135
    Synonyms : FBA 135; OBA 135, Fluorescent Brightener PF; Optical Brightener Agent PF,Optical Brightener PF
    read more
  • Optical Brightener CBS-X for Detergent
    Product name: Tonex white CBS-X (CBS-351)
    Color Index No: C.I.351
    Synonyms : FBA 351; OBA 351, Fluorescent Brightener CBS-X (CBS-351); Optical Brightener Agent CBS-X (CBS-351) ...
    read more
First 123 Last
 
Product Types & Chemical Classifications

 

Series Designation

Chemical Class

Primary Substrates

Recommended Processing Temp

Key Characteristics

OB (OB-1)

Benzoxazole derivative

Polyester (PET), PBT, Nylon, Polyolefins

Up to 300°C

Exceptional thermal stability, high lightfastness, strong blue-violet shade.

OB-3

Stilbene-triazine derivative

PVC, PS, Polyolefins, Coatings

Up to 240°C

High whitening efficiency at low dosage, cost-effective for general plastics.

KCB

Benzoxazole / Bis-benzoxazole

PE, PP, EVA, Synthetic Leather, Masterbatches

Up to 280°C

Brilliant blue-white appearance, excellent weather resistance, low volatility.

CBS-X

Stilbene-disulfonic acid derivative

Liquid Detergents, Soaps, Textile Finishes

Aqueous system (Room Temp)

High water solubility, excellent chlorine bleach stability, cold-water performance.

FP-127

Pyrazoline derivative

PVC, Polystyrene, Polycarbonate, Acetate

Up to 240°C

Distinct reddish-blue shade, highly compatible with flexible and rigid PVC.

 

Physical Forms: Micronized powder (99% purity min.), pre-dispersed liquid slurries, and active-loaded masterbatch pellets (PE/PP carrier base at 5%–20% active concentration). 

 

Optical Brightener OB For Coating

 

Industrial Applications

Polymer Compounding & Masterbatch
Virgin & Recycled Resins: Eliminates yellowing induced by thermal shear history in recycled HDPE, PP, and ABS.


Engineering Plastics: Prevents discoloration during high-temperature glass-filled PA and PC extrusion.


Textiles & Synthetic Fibers
Polyester & Nylon Spinning: Applied during melt extrusion or post-draw bath treatment to achieve permanent high whiteness against ultraviolet degradation.


Detergents & Cleaners
Liquid Formulations: CBS-X grades dissolve completely in surfactant matrices without precipitating under high electrolyte or alkaline conditions.

 

Key Technical Specifications

 

Appearance

Pale yellow to yellowish-green crystalline powder (or white-to-off-white granules).

Melting Point Range

195°C to 360°C (dependent on specific CAS grade; specific values detailed in individual TDS).

Volatile Matter

Less than 0.5% (measured at 105°C for 2 hours).

Ash Content

Less than 0.1%.

Recommended Dosage

Plastics / Masterbatch: 0.01%–0.05% by polymer weight (100–500 ppm).

Detergents: 0.05%–0.15% by formulation weight.

Fibers: 0.02%–0.08% relative to mass.

 

 

Customization & Supply Chain

Batch Consistency: Every production batch undergoes HPLC (High-Performance Liquid Chromatography) purity assay, spectrophotometric UV-Vis absorbance/emission verification, and laboratory-scale masterbatch let-down dispersion testing.


Traceability: Lot numbers stamped on all packaging link directly to raw material synthesis logs and analytical testing archives maintained for 5 years.


Documentation Provided with Shipment:
COA (Certificate of Analysis): Actual purity, melting point, volatile content, and appearance per production lot.


TDS (Technical Data Sheet): Full processing guidelines and physical property profiles.


SDS (Safety Data Sheet): GHS-compliant health, handling, and environmental data.


Regulatory Status: REACH pre-registration/registration status, RoHS compliance declarations, and heavy metal test reports (ICP-MS verified).

Optical Brightener OB-1 For PSF

 

Frequently Asked Questions

 

Q: How do I prevent thermal degradation when processing optical brighteners at temperatures above 280°C?

A: Select high-thermal-stability grades such as OB-1 (stable up to 300°C). Avoid prolonged dwell times in high-shear extrusion screws. Ensure the resin moisture content is below 0.05% prior to feeding to prevent hydrolytic degradation alongside thermal stress.

Q: What causes specking or white/blue spots in thin-film extrusion?

A: Specking typically results from agglomerated powder particles due to moisture uptake or insufficient dispersion during initial mixing. We recommend using our pre-dispersed liquid form, masterbatch pellets, or jet-milled powder grades with a strict D90 threshold, combined with an appropriate high-shear twin-screw compounding profile.

Q: Can optical brighteners migrate to the surface of molded plastic parts over time?

A: Migration depends on the compatibility between the brightener molecule and the polymer matrix. Exceeding the saturation concentration threshold (typically above 0.08% in polyolefins) causes blooming or plate-out. Adhering to the recommended 100–500 ppm dosing range prevents surface migration.

Q: Are these optical brighteners approved for food-contact packaging applications?

A: Specific grades comply with FDA 21 CFR regulations and EU 10/2011 food-contact standards. Review the specific regulatory compliance annex on the individual product TDS or request a dedicated food-contact declaration from our technical team.

Q: What is the standard shelf life and how should the product be stored?

A: Stored in original, unopened containers in a cool, dry, well-ventilated area away from direct sunlight, powder grades maintain stability for 24 months. Liquid dispersions should be protected from freezing and agitated before use if stored for extended periods.

Q: How do I determine the correct dosage for my specific polymer formulation?

A: Start with a pilot trial at 0.02% (200 ppm) concentration. Measure whiteness index (CIE L*a*b* coordinates) using a spectrophotometer. Adjust in increments of 50 ppm until the target yellowness index (YI) reduction is achieved without over-whitening (which can impart an unwanted blue/gray tint).

 

modular-1
Request a Quote & Laboratory Samples

For technical grade selection, commercial volume pricing, or laboratory sample dispatch, submit your application parameters (polymer type, processing temperature, and target whiteness index) to our technical sales team.
Required Inquiry Details: Polymer grade, annual volume projection, delivery destination port, and specific regulatory requirements (REACH/FDA).
Response SLA: Technical and commercial inquiries reviewed and answered by application engineers within 24 business hours.

We're well-known as one of the leading optical brighteners manufacturers and suppliers in China. With abundant experience, we warmly welcome you to buy bulk high quality optical brighteners for sale here from our factory. For price consultation, contact us.