UV Absorber

High-Performance UV Absorbers for PVC Processing & Polymer Compounding

 

UV absorbers prevent photo-degradation in PVC and other polymer matrices by preferentially absorbing harmful ultraviolet radiation (290–400 nm) and dissipating the energy as thermal energy. In rigid and plasticized PVC processing—typically operating at temperatures between 165°C and 200°C—unprotected polymer chains undergo photo-oxidation, resulting in chain scission, cross-linking, discoloration (yellowing), and loss of mechanical impact strength.


Our UV absorbers are engineered for high thermal stability during extrusion and calendering, ensuring low volatility at elevated processing temperatures and minimal plate-out on mold surfaces.

 
 
Product Categories

While UV absorbers form the core of weathering protection, they operate synergistically within broader PVC additive systems:

UV Absorbers (UVA):

Benzophenones and Benzotriazoles that absorb incident UV radiation and convert it into thermal energy.

01

Thermal Stabilizers:

Calcium-Zinc (Ca-Zn) and Organotin systems required to prevent thermal degradation during initial processing.

02

Processing Aids:

Acrylic-based modifiers to improve fusion rates and melt strength in rigid PVC extrusion.

03

Impact Modifiers:

CPE or MBS grades designed to maintain low-temperature toughness without compromising UV resistance.

04

Lubricants (Internal/External):

Paraffin waxes and fatty acid esters to balance melt viscosity and prevent barrel sticking.

05

 

Applications

 

Tailored for diverse PVC processing methods requiring long-term outdoor weatherability:

 
01
 

PVC Pipes:

Outdoor drainage, potable water, and conduit pipes exposed to direct sunlight.

 
02
 

Profiles:

Window frames, siding, and outdoor decking requiring Delta E color stability over years of exposure.

 
03
 

Films:

Agricultural greenhouse films and geomembranes requiring resistance to UV degradation and agrochemical stress.

 
04
 

Sheets:

Foamed and solid PVC sheets for signage and exterior cladding.

 
05
 

Cables:

Jacketing and insulation compounds for outdoor electrical and telecommunication lines.

UV Absorbers for Polymers UV 531

 

Key Specifications

 

Technical Parameter

Test Method

Typical Value / Range

Active Substance Content

HPLC / Titration

≥ 99.0%

Appearance

Visual

White to pale yellow crystalline powder / granules

Melting Point / Range

ASTM D1517

128°C - 138°C (Grade dependent)

Volatile Matter

ASTM D4441 (105°C, 2h)

< 0.5%

Ash Content

ISO 3451

< 0.1%

Recommended Dosage

Compounding Ratio

0.2% - 0.8% by total resin weight

Processing Temperature

Extrusion / Calendering

Up to 220°C

 

Formulation & Customization

Different end-use environments demand precise additive synergy. We provide technical support for:

 
 

Synergistic Blends:

Combining UV absorbers with Hindered Amine Light Stabilizers (HALS) and phenolic antioxidants to achieve cooperative radical scavenging and UV shielding.

 
 
 

Masterbatch & One-Pack Solutions:

Formulating dust-free solid masterbatches or liquid pre-blends to match existing feeder systems at customer extrusion lines.

 
 
 

Custom Particle Size Distribution:

Adjusting milling parameters to improve dispersion rates in high-speed dry-blend mixers and prevent screw slippage.

 

 

Quality Control & Compliance

Manufacturing consistency is verified through rigorous in-house laboratory testing prior to commercial shipment:

Batch Testing:
Each production lot undergoes HPLC purity analysis, moisture determination, and melting point verification.
Thermal Stress Simulation:
Laboratory Brabender Plastograph testing evaluates torque stability and color retention under simulated extrusion conditions.
Regulatory Compliance:
Products meet REACH, RoHS, and FDA food-contact standards where applicable. Technical Data Sheets (TDS), Material Safety Data Sheets (MSDS), and heavy metal test reports are supplied with every order.

 

Frequently Asked Questions

 

Q: How do UV absorbers differ from HALS in PVC formulations?

A: UV absorbers act by screening and absorbing harmful UV radiation, converting it into harmless thermal energy. HALS (Hindered Amine Light Stabilizers) act as radical scavengers that neutralize polymer radicals generated during photo-oxidation. Combining both yields a synergistic weathering performance.

Q: What causes plate-out on extrusion dies when using additive packages?

A: Plate-out is typically caused by incompatible lubricants, excessive volatile content, or degradation products under high shear and temperature. Selecting a high-purity UV absorber with low volatility (< 0.5%) and optimizing internal/external lubrication ratios eliminates die buildup.

Q: What is the recommended starting dosage for rigid PVC window profiles?

A: For exterior rigid PVC profiles exposed to high solar radiation, the standard starting concentration ranges from 0.3% to 0.5% (3 to 5 parts per thousand resin), balanced with titanium dioxide (TiO2) pigments for optimal opacity and scattering.

Q: Will the UV absorber cause initial yellowness in clear PVC films?

A: High-purity grades maintain an initial Yellowness Index (YI) below 2.0. Discoloration usually stems from thermal degradation during processing rather than the UV absorber itself, provided processing temperatures remain below 210°C and adequate thermal stabilizers are present.

Q: Are these additives compatible with calcium-zinc (Ca-Zn) thermal stabilization systems?

A: Yes. Our UV absorbers are chemically inert toward standard Ca-Zn and organotin stabilizer systems used in rigid and plasticized PVC, avoiding adverse cross-reactions or antagonism.

Q: What packaging options are available for industrial compounding?

A: Standard packaging includes 25 kg fiber drums or polyethylene-lined woven bags secured on fumigation-free wooden pallets. Custom bulk bags (500 kg to 1000 kg FIBC) are available upon request for automated feeding systems.

 

modular-1
Request a Quote & Formulation Advice

To receive a tailored technical recommendation, sample shipment, and quotation, please provide your processing parameters below:
End-Product Type: (e.g., rigid pipe, window profile, flexible cable jacket)
Processing Method: (e.g., twin-screw extrusion, calendering, injection molding)
Processing Temperature Range: (°C)
Outdoor Exposure Requirement: (e.g., standard climate, high-UV tropical region)
Target Quantity & Destination Port:

We're well-known as one of the leading UV absorber manufacturers and suppliers in China. With abundant experience, we warmly welcome you to buy bulk high quality UV absorber for sale here from our factory. For price consultation, contact us.

UV Absorbers UV 329, uv absorber, UV Absorbers UV 326