Textile Optical Brightener
Textile Optical Brightener (Fluorescent Whitening Agents) | Industrial B2B Technical Guide
Textile Optical Brighteners (Fluorescent Whitening Agents, FWAs) are high-purity fine chemical additives engineered to absorb invisible ultraviolet radiation (300 - 400 nm) and re-emit blue fluorescence (420 - 470 nm). This optical conversion neutralizes inherent yellow discoloration in polymers and fibers, boosting the CIE whiteness index without altering mechanical properties.
Primary Substrates: Polyester (PET), Polyamide (Nylon), Cellulosics (Cotton, Rayon, Viscose), Polypropylene (PP), and synthetic blends.
Core Industrial Applications: Continuous textile padding, high-temperature exhaust dyeing, synthetic fiber melt extrusion, masterbatch compounding, and industrial detergent formulation.
Production Baseline: Synthesized via controlled condensation and multi-stage crystallization routes, ensuring extremely low impurity profiles to eliminate thermal degradation, plate-out, or die buildup during high-speed extrusion.
-
Optical Brightener BAProduct name: Tonex white BAread more
Color Index No: C.I.113
Synonyms : FBA 113; OBA 113, Fluorescent Brightener BA; Optical Brightener Agent BA -
Optical Brightener CXT for CottonProduct name: Tonex white CXTread more
Color Index No: C.I.71
Synonyms : FBA 71; OBA 71, Fluorescent Brightener CXT; Optical Brightener Agent CXT -
Optical Brightener PS-1 for PolyesterProduct name: Tonex white ER Liquid(PS-1. ER330)read more
Color Index No: C.I.199
Synonyms : FBA 199; OBA 199, Fluorescent Brightener PS-1(ER330); Optical Brightener Agent PS-1(ER330) ... -
Optical Brightener PS-2 for PolyesterProduct name: Tonex white ER-II Liquid(PS-2. ER-II 330)read more
Color Index No: C.I.199:1 Liquid
Synonyms : FBA 199:1 Liqulid; OBA 199 Liquid, Fluorescent Brightener PS-2; Optical Brightener...
Product Grades & Chemical Classification
Selecting the correct grade depends on the target substrate, processing temperature, solubility parameters, and downstream finishing requirements.
|
Grade |
Chemical Structure & CAS |
Target Substrates |
Processing Method & Technical Notes |
|
BA |
Stilbene-Triazine Derivative (CAS 3426-43-5 / 27344-41-8 equivalent) |
Cellulosic Fibers (Cotton, Rayon, Viscose), Blends |
Water-soluble; exhibits strong affinity for cellulose. Optimized for continuous pad-dry-cure and exhaust dyeing at moderate temperatures (60 - 90 °C). Delivers a neutral-blue shade. |
|
CXT |
Bis(triazinylamino)stilbene Disulfonic Acid Derivative |
Cotton, Wool, Paper, Liquid Detergent Blends |
High water solubility and excellent alkaline stability. Engineered for peroxide bleaching baths and simultaneous scour-bleach-whitening processes. |
|
PS-1 |
Benzoxazole Derivative (e.g., FWA-OB / C.I. 393) |
Polyester (PET), Nylon, Polypropylene, PVC |
Insoluble in water, soluble in organic solvents and polymer melts. Exceptional thermal stability exceeding 300 °C. Ideal for polyester staple fiber melt spinning and masterbatch compounding. |
|
PS-2 |
Substituted Benzoxazole / Naphthalimide Blend |
Synthetic Fibers (Polyester, Acetate, Polyamide) |
Formulated for high-speed fiber extrusion and thin-film casting. Provides intense blue-violet fluorescence, minimal volatility at elevated spinneret temperatures (>280 °C), and high light fastness. |
Available Physical Forms:
Micronized Powder: ≥ 98.5% active content, particle size controlled (D90 < 10 µm) for homogeneous dry-blending and masterbatch compounding.
Aqueous Liquid: Pre-dissolved or dispersed formulations (15% - 30% active) for continuous padding ranges and automatic liquid chemical dosing systems.
Industrial Application Scenarios
Polyester Melt Spinning: High thermal stability grades (PS-1, PS-2) at >280 °C.
Cotton Pad-Dry-Cure: Aqueous stilbene formulation (BA, CXT).
Masterbatch Compounding: Low-dust micronized powder (PS-1, PS-2).
Detergent Formulation: High solubility liquid/powder brighteners.
Polyester (PET) & Nylon Fiber Extrusion: Incorporated using PS-1 or PS-2 during masterbatch let-down or direct chip-spinning. Maintains structural integrity under continuous thermal stress without yellowing or sublimation.
Cellulosic Textile Wet Processing: Applied via BA and CXT in pad-steam or exhaust dyeing ranges. Provides high fixation rates and resistance to subsequent resin finishing treatments.
Polymer Masterbatch Compounding: Dry-blended with carrier resins (PE, PP, PET, PA) for film blowing, injection molding, and monofilament extrusion.
Industrial Detergents: Formulated into heavy-duty powders and surfactant liquids to deposit optical brighteners onto textile surfaces, maintaining garment brightness through multiple wash cycles.
Key Technical Specifications
Representative specification baselines across standard industrial grades (BA, CXT, PS-1, PS-2).
|
Parameter |
Test Standard / Method |
Typical Specification Range |
|
Active Content / Purity |
HPLC / Titration |
≥ 98.5% (Powder grades) |
|
Appearance |
Visual Inspection |
Lemon-yellow to light green fine crystalline powder |
|
Melting Point |
Capillary Melting Point Apparatus |
200 °C to 360 °C (Grade dependent) |
|
Shade (Hue Tone) |
Spectrophotometer vs. Standard |
Bluish-white to neutral white (Negative Δb*) |
|
Volatile Matter |
Oven Drying (105 °C, 2 h) |
≤ 0.5% |
|
Thermal Stability |
TGA / Extrusion Test |
Up to 300 °C (PS-1 & PS-2 grades) |
|
Recommended Dosage |
Laboratory Trial Baseline |
0.01% - 0.05% by weight (plastics); 0.1% - 0.5% o.w.f. (textiles) |
Production Infrastructure:
Multi-ton synthesis capacity backed by automated reaction vessels, precision crystallization units, and air-jet micronization milling systems.
Manufacturing Control & Customization:
Particle size distribution (PSD) tuning to prevent dusting or agglomeration during masterbatch feeding.
Custom active content adjustment and carrier blending for polymer compounders.
OEM neutral packaging and private-label container labeling for international chemical distributors.
Standard Packaging:
Powder: 25 kg fiber drums or reinforced cardboard boxes lined with dual polyethylene (PE) moisture barrier bags.
Liquid: 200 kg heavy-duty HDPE plastic drums or 1,000 kg IBC totes.
Commercial Terms: Minimum Order Quantity (MOQ): 500 kg for standard grades (BA, CXT, PS-1, PS-2); 1,000 kg for customized formulations. Standard production lead time: 10–14 business days.


Batch Consistency Verification: Every production run undergoes HPLC purity assay, spectrophotometric whiteness index measurement, and ash residue testing. Retained archive samples are kept for 24 months for complete traceability.
Mandatory Documentation Supplied with Shipments:
COA (Certificate of Analysis): Batch-specific verification of purity, melting point, volatile matter, and shade index.
TDS (Technical Data Sheet): Comprehensive application guidelines, recommended dosages, and processing temperature limits.
SDS (Safety Data Sheet): GHS-compliant safety documentation covering personal protective equipment, handling precautions, and environmental disposal.
Regulatory Compliance: Free from restricted aromatic amines and heavy metals; complies with EU REACH pre-registration/registration, RoHS directives, and Oeko-Tex Standard 100 restricted substance requirements.
Frequently Asked Questions

Request a Quote & Sample
To receive a formal quotation, technical data sheets, or a laboratory sample kit tailored to your polymer substrate or textile processing method, provide your technical requirements below:
Target Substrate / Material: (e.g., PET Staple Fiber, Nylon 6 Injection Molding, Cotton Pad-Dyeing)
Required Grade / Form: (BA, CXT, PS-1, or PS-2)
Estimated Annual Volume / Trial Quantity:
Destination Port / Delivery Location:
We're well-known as one of the leading textile optical brightener manufacturers and suppliers in China. With abundant experience, we warmly welcome you to buy bulk high quality textile optical brightener for sale here from our factory. For price consultation, contact us.
Optical Brightener BA, textile optical brightener, Optical Brightener PS 2 For Polyester